CAM & GROOVE COUPLINGS
Hose-to-Hose or Hose-to-pipe American “military specification” quick coupling
Camlock couplings are manufacturerd worldwide according to the American “military specification” MIL-C-27487. This American standard fixes the coupling side in a limited way, but not the connection side.
The Camlock Quick Couplings are used for hose-to-hose or hose-to-pipe / manifold connections for the transfer of liquids or dry bulk products.
Note:Cam & groove couplings must never be used for steam or compressed air applications.
Construction
- Brass, Aluminium alloys, Stainless Steel body material options
- NBR-Gasket working at -20°C to +65°C
FEATURES
- Cam loking couplings serve as the link between hoses and connections to transport liquids, solids and gases, except liquid gas and steam.
- The couplings are capable of operating of operating the pressure range 0.8 bar to 16 bar working pressure.
- Aluminium-cast-materials working pressure 0.8 bar to 10 bar.
- Suitable to operate without using any tools
APPLICATIONS
- Cam loking couplings serve as the link between hoses and connections to transport liquids, solids and gases, except liquid gas and steam industrial,
Dimensions
Available Seals and Temperature Range
All carbon steel products have Nitrile Butadiene Rubber (NBR) seals fitted as standard. All stainless steel products have Fluoro-elastomer Rubber (Viton®) (FKM) seals fitted as standard. Special seal materials are available on request.
Abbreviation | Trade Name | Chemical Name | Min. Temp | Max. Temp |
---|---|---|---|---|
NBR, XNBR | Chemigum®, Hycar8, Breon®, Butakon®, Butacril®, Buna-N®, Perbunan®, Paracril®, Krynac®, Europrene-N®, Nipol® | Nitrile Butadiene Rubber Carboxylated Nitrile Rubber |
-40ºC (-40ºF) | 106ºC (223ºF) |
FKM(FPM) | Dai-el®, Fluorel®, Tecnoflon®, Viton® | Fluoro-elastomer Rubber | -20ºC (-4ºF) | 200ºC (392ºF) |
EPR, EPDM | Buna-AP®, Dufral®, Epsyn®, Nordel®, Epcar8, Keltan®, Royalene®, Polysar-EPDM® | Ethylene Propylene Copolymer Ethylene Propylene Terpolymer |
-50ºC (-58ºF) | 120ºC (248ºF) |
FVMQ | Silastic 1S®, FSE® | Fluorosilicone Rubber | -65ºC (-85ºF) | 170ºC (338ºF) |
FFKM | Perlast®, Kalrez®, Chemraz®, Kaflon® | Perfluoroelastomer | -25ºC (-13ºF) | 300ºC (572ºF) |